General information for homeowners, not engineering or legal advice. Every house and lot is different; have a qualified contractor or structural engineer look at yours.
Piering and slab jacking both “lift concrete,” so they get mixed up. They solve different problems. Piering carries a house’s weight down to deeper ground. Slab jacking fills the space under a sunken slab to raise it. On Jackson’s expansive Yazoo clay, the difference matters.
Piering in plain English
Piers are columns installed under the foundation, down past the shallow soil that swells and shrinks. The house is then supported on the piers and can be lifted back toward level with hydraulic jacks. Common types include pressed concrete piers, steel push piers, helical piers and drilled concrete piers.
The approach matches what Mississippi geologists say about building on Yazoo clay: pile foundations “have been used successfully in the Yazoo Clay area,” and it’s desirable to have them reach the unweathered zone of the clay. Highway engineers studying Jackson-area clay also recommended poured-in-place piling for buildings and found seasonal moisture change was minor below about 8 feet.
Slab jacking in plain English
Slab jacking, also called mudjacking, pumps a cement-based slurry under a sunken slab through small holes. Polyurethane foam lifting works the same way with expanding foam. Both raise and support concrete that has dropped, such as a driveway, sidewalk, patio, pool deck or garage floor.
What slab jacking doesn’t do is reach past the active clay. The material sits right under the slab, in the soil zone that keeps moving. That’s why it’s usually a flatwork fix, not a whole-house foundation repair, on expansive soil.
Side by side
| Piering | Slab jacking | |
|---|---|---|
| What it does | Transfers the house’s weight to deeper soil, then lifts | Fills voids and raises a sunken slab |
| Best for | Houses that are settling or moving with the clay | Driveways, walks, patios, garage floors |
| Reaches below active clay | Yes, that’s the point | No |
| US national cost (Angi 2026) | $1,000 – $3,000 for piering or underpinning | $500 – $1,300 |
| Disruption | Digging at the perimeter; sometimes holes through interior floors | Small drilled holes, quick cure |
A whole-house pier job usually involves many piers, so the total is well above the per-job figure above. Get the pier count in writing.
Which one does your house need?
- Interior cracks, sticking doors, sloping floors: the structure is moving. That usually points to piers, a crawl space re-level, or both, plus drainage fixes.
- Only the driveway or patio has dropped: slab jacking may be all you need.
- Both: fix the house first, then the flatwork.
- Raised pier-and-beam house: neither, exactly. Re-shimming and added supports under the floor are the usual fix. See crawl space repair and leveling.
Questions to ask the contractor
- What type of pier, how deep, and how is depth decided on site?
- How many piers, and where? Can I see a drawing?
- What’s the lift target, and what happens to finishes if they crack?
- What does the warranty cover, for how long, and does it transfer?
- Do you recommend drainage work or a plumbing test first?
Ready for a professional opinion? Request a free written estimate.